You are here: Using the DHR/AR > Using the DHR/AR Test Geometries > Available Test Geometries

Available Test Geometries for the DHR/AR Rheometer

Select from the following topics for information:

	Parallel Plate		Torsion [Rectangular/Cylindrical]
	Cone and Plate		Extensional [EVF/SER]
	Concentric Cylinder [DIN, Recessed/Standard, Vane]		Special
	Linear Tension		Three Point Bending
	Compression		Clamped Bending
	Mixed Bending		Interfacial Accessories
	Double Wall Concentric Cylinder		Starch Pasting Cell
	Helical Ribbon		Pressure Cell
	Building Material Cell		Tribology

See Also

Introducing DHR/AR Test Geometries